Instance (Mst) - Cisco SPS2024 Reference Manual

Spanning Tree Commands

instance (mst)

instance (mst)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The instance MST Configuration mode command maps VLANS to an MST
instance.
Syntax
instance instance-id
Parameters
•
instance-ID—
ID of the MST instance (Range: 1- 7).
•
vlan-range—
VLANs to be added to or removed from the specified MST
instance. To specify a range of VLANs, use a hyphen. To specify a series of
VLANs, use a comma. (Range: 1-4094).
Default Configuration
VLANs are mapped to the common and internal spanning tree (CIST) instance
(instance 0).
Command Modes
MST Configuration mode
User Guidelines
All VLANs that are not explicitly mapped to an MST instance are mapped to the
common and internal spanning tree (CIST) instance (instance 0) and cannot be
unmapped from the CIST.
For two or more devices to be in the same MST region, they must have the same
VLAN mapping, the same configuration revision number, and the same name.
{add | remove} vlan vlan-range
28
386