Address Table Commands
show ports security
show ports security
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
In this example, the Multicast configuration for VLAN 1 is displayed.
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port
Static
----
---------
e1
e2
e3
The show ports security Privileged EXEC mode command displays the port-lock
status.
Syntax
show ports security [ethernet
Parameters
•
interface —
A valid Ethernet port.
•
port-channel-number —
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Status
---------
Filter
Filter
Filter
interface
| port-channel
A valid port-channel number.
port-channel-number
5
]
96