Ip Https Authentication - Cisco SPS2024 Reference Manual

AAA Commands

ip https authentication

ip https authentication
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
User Guidelines
The additional methods of authentication are used only if the previous method
returns an error, not if it fails. To ensure that the authentication succeeds even if all
methods return an error, specify none as the final method in the command line.
Example
The following example configures the HTTP authentication.
Console(config)# ip http authentication radius tacacs local none
The ip https authentication Global Configuration mode command specifies
authentication methods for HTTPS server users. To restore the default
configuration, use the no form of this command.
Syntax
ip https authentication
no ip https authentication
Parameters
•
method1 [ method2...
Keyword
local
none
radius
tacacs
method1 method2...
[
] — Specify at least one method from the following list:
Description
Uses the local username database for
authentication.
Uses no authentication.
Uses the list of all RADIUS servers for
authentication.
Uses the list of all TACACS+ servers for
authentication.
]
2
40