Spanning-Tree Mst Max-Hops - Cisco SPS2024 Reference Manual

Spanning Tree Commands

spanning-tree mst max-hops

spanning-tree mst max-hops
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
instance-id—
ID of the spanning-tree instance (Range: 1-7).
•
priority—
Device priority for the specified spanning-tree instance (Range: 0-
61440 in multiples of 4096).
Default Configuration
The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.
Command Mode
Global Configuration mode
User Guidelines
The device with the lowest priority is selected as the root of the spanning tree.
Example
The following example configures the spanning tree priority of instance 1 to 4096.
Console (config) # spanning-tree mst 1 priority 4096
The spanning-tree mst priority Global Configuration mode command configures
the number of hops in an MST region before the BDPU is discarded and the port
information is aged out. Use the no form of this command to restore the default
configuration.
Syntax
spanning-tree mst max-hops
no spanning-tree mst max-hops
hop-count
28
381