Ip Http Port - Cisco SPS2024 Reference Manual

Web Server Commands

ip http port

ip http port
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
To specify the TCP port to be used by the web browser interface, use the ip http
port global configuration command. To use the default port, use the no form of this
command.
Syntax
ip http port port-number
no ip http port
Parameters
•
port-number — Port number for use by the HTTP server. Range: 0 - 65534
Default Configuration
80
Command Mode
Global configuration
Usage Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
Examples
Console(config)# ip http port 100
35
507