Show Interfaces Counters - Cisco SPS2024 Reference Manual

Ethernet Configuration Commands

show interfaces counters

show interfaces counters
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example displays descriptions of configured interfaces.
Console# show interfaces description
Port Description
---- -----------
e1 lab
e2
e3
e4
e5
e6
ch1
ch2
The show interfaces counters Privileged EXEC mode command displays traffic
seen by the physical interface.
Syntax
show interfaces counters [ethernet
Parameters
•
interface
— A valid Ethernet port.
•
port-channel-number —
Default Configuration
This command has no default configuration.
interface
| port-channel
A valid port-channel number.
12
port-channel-number
171
]