Spanning-Tree Mst Port-Priority - Cisco SPS2024 Reference Manual

Spanning Tree Commands

spanning-tree mst port-priority

spanning-tree mst port-priority
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
hop-coun
t—Number of hops in an MST region before the BDPU is
discarded. (Range: 1-40)
Default Configuration
The default number of hops is 20.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the maximum number of hops that a packet
travels in an MST region before it is discarded to 10.
Console (config) # spanning-tree mst max-hops 10
The spanning-tree mst port-priority Interface Configuration mode command
configures port priority for the specified MST instance. Use the no form of this
command to restore the default configuration.
Syntax
instance-id
spanning-tree mst
no spanning-tree mst
port-priority
instance-id
port-priority
priority
28
382