Show Interfaces Port-Channel - Cisco SPS2024 Reference Manual

Port Channel Commands

show interfaces port-channel

show interfaces port-channel
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example forces port e1 to join port-channel 1 without an LACP
operation.
Console(config)# interface ethernet e1
Console(config-if)# channel-group 1 mode on
The show interfaces port-channel Privileged EXEC mode command displays port-
channel information.
Syntax
show interfaces port-channel [
Parameters
•
port-channel-number
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
port-channel-number
— Valid port-channel number.
]
21
263