Sntp Trusted-Key - Cisco SPS2024 Reference Manual

Clock Commands

sntp trusted-key

sntp trusted-key
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
User Guidelines
The command can change the SNTP UDP port.
Example
Console(config)# sntp port 12555
The sntp trusted-key Global Configuration mode command authenticates the
identity of a system to which Simple Network Time Protocol (SNTP) will
synchronize. Use the no form of this command to disable authentication of the
identity of the system.
Syntax
key-number
sntp trusted-key
key-number
no sntp trusted-key
Parameters
•
key-number
— Key number of authentication key to be trusted. (Range: 1-
4294967295)
Default Configuration
No keys are trusted.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both received Unicast and Broadcast.
6
108