Show System - Cisco SPS2024 Reference Manual

System Management Commands

show system

show system
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The following table describes significant fields shown above.
Field
Connection
Host
Address
Port
Byte
The show system Privileged EXEC mode command displays system information.
Syntax
unit
show system [unit
Parameters
•
unit
— Specifies the number of the unit. (Range: 1-8)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Description
Connection number
Remote host to which the device is connected
through a Telnet session.
IP address of the remote host.
Telnet TCP port number
Number of unread bytes for the user to see on the
connection.
]
31
452