Cisco SPS2024 Reference Manual page 532

802.1x Commands
show dot1x
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Field Description
Port The port number.
Admin mode The port admin mode. Possible values: Force-
auth, Force-unauth, Auto.
Oper mode The port oper mode. Possible values: Authorized,
Unauthorized or Down.
Reauth Control Reauthentication control.
Reauth Period Reauthentication period.
Username The username representing the identity of the
Supplicant. This field shows the username in case
the port control is auto. If the port is Authorized, it
shows the username of the current user. If the port
is unauthorized it shows the last user
authenticated successfully.
Quiet period The number of seconds that the device remains in
the quiet state following a failed authentication
exchange (for example, the client provided an
invalid password).
Tx period The number of seconds that the device waits for a
response to an Extensible Authentication Protocol
(EAP)-request/identity frame from the client
before resending the request.
Max req The maximum number of times that the device
sends an Extensible Authentication Protocol
(EAP)-request frame (assuming that no response
is received) to the client before restarting the
authentication process.
Supplicant timeout Time in seconds the switch waits for a response to
an EAP-request frame from the client before
resending the request.
Server timeout Time in seconds the switch waits for a response
from the authentication server before resending
the request.
Session Time The amount of time the user is logged in.
MAC address The supplicant MAC address.
Authentication The authentication method used to establish the
Method session.
36
530