Qos Trust (Global) - Cisco SPS2024 Reference Manual

QoS Commands

qos trust (Global)

qos trust (Global)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays how to priorities dscp values within the same
queue.
Console(config)# qos map dscp-dp 30 to 0
The qos trust Global Configuration mode command configures the system to the
basic mode and trust state. Use the no form of this command to return to the
untrusted state.
Syntax
qos trust {cos | dscp}
no qos trust
Parameters
•
cos — Indicates that ingress packets are classified with packet CoS values.
Untagged packets are classified with the default port CoS value.
•
dscp — Indicates that ingress packets are classified with packet DSCP
values.
Default Configuration
CoS is the default trust mode.
23
298