Name (Mst) - Cisco SPS2024 Reference Manual

Spanning Tree Commands

name (mst)

name (mst)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example maps VLANs 10-20 to MST instance 1.
Console(config)# spanning-tree mst configuration
Console(config-mst)# instance 1 add vlan 10-20
The name MST Configuration mode command defines the configuration name.
Use the no form of this command to restore the default setting.
Syntax
name string
Parameters
•
string
— MST configuration name. The name is case-sensitive. (Range: 1-32
characters)
Default Configuration
The default name is a radlan_guest.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
28
387