Chapter 7: Configuration And Image File Commands; Copy - Cisco SPS2024 Reference Manual

Configuration and Image File Commands

copy

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The copy Privileged EXEC mode command copies files from a source to a
destination.
Syntax
source-url destination-url
copy
Parameters
•
source-url
— The source file location URL or reserved keyword of the
source file to be copied. (Range: 1-160 characters)
•
destination-url
destination file. (Range: 1-160 characters)
•
snmp — Used only when copying from/to startup-config. Specifies that the
destination/source file is in SNMP format.
The following table displays keywords and URL prefixes.
Keyword
running-config
startup-config
image
[snmp]
— The destination file URL or reserved keyword of the
Source or Destination
Represents the current running configuration
file
Represents the startup configuration file.
If the source file, it represents the active
image file. If the destination file, it represents
the non-active image file.
7
122