Show Access-Lists - Cisco SPS2024 Reference Manual

Cisco systems ethernet switch reference guide
Hide thumbs Also See for SPS2024:
Table of Contents

Advertisement

ACL Commands

show access-lists

show access-lists
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Syntax
service-acl input acl-name1
no service-acl input
Parameters
acl-name — Specifies an ACL to apply to the interface. Please see the usage
guidelines.
Default Configuration
No ACL is assigned.
Command Mode
Interface configuration (Ethernet, Port-Channel).
Usage Guidelines
Two ACLs of the same type can't be added to a port.
An ACL can't be added to a port that is already bounded to an ACL, without
first removing the current ACL and binding the two ACLs together.
The show access-lists Privileged EXEC mode command displays access control
lists (ACLs) defined on the device.
Syntax
name
show access-lists [
Parameters
name
— The name of the ACL.
]
3
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sps224g4Sps208g

Table of Contents