Table of Contents
Advertisement
Status and Statistics
Viewing TCAM Utilization
STEP 5
Viewing TCAM Utilization
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Click View All Interfaces Statistics to see the statistics counters for all interfaces
on a single page. The Etherlike Statistics Table displays the above counters for
all interfaces. From this page you can perform the following actions:
•
Select the refresh rate from the Refresh Rate drop-down menu.
•
Select an interface and click Clear Interface Counters to clear the statistics
counters for the selected interface.
•
Click Clear All Interface Counters to clear the statistics counters for all
interfaces.
•
Select an interface and click View Interface Statistics to see the statistics
counters for the selected interface on a single page.
•
Click Refresh to manually refresh the statistics counters for all interfaces.
The switch architecture uses a Ternary Content Addressable Memory (TCAM) to
support packet actions in wire speed. TCAM holds the rules produced by
applications (such as ACL and QoS) and the system-created rules.
Only system application allocates rules upon its initiation.
To view TCAM utilization, click Status and Statistics > TCAM Utilization.
The following fields are displayed:
•
Maximum TCAM Entries—Maximum TCAM Entries available.
•
In Use—Number of TCAM entries used.
2
21
Advertisement
Table of Contents
