Tacacs-Server Source-Ip - Cisco SPS2024 Reference Manual

Cisco systems ethernet switch reference guide
Hide thumbs Also See for SPS2024:
Table of Contents

Advertisement

TACACS+ Commands

tacacs-server source-ip

tacacs-server source-ip
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The tacacs-server source-ip Global Configuration mode command configures the
source IP address to be used for communication with TACACS+ servers. Use the
no form of the command to restore the default configuration.
Syntax
tacacs-server source-ip
no tacacs-server source-ip
Parameters
source
— Specifies the source IP address.
Default Configuration
The source IP address is the address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the source IP address for all TACACS+ servers.
Console(config)# tacacs-server source-ip 172.16.8.1
source
source
32
460

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sps224g4Sps208g

Table of Contents