Sntp Anycast Client Enable - Cisco SPS2024 Reference Manual

Clock Commands

sntp anycast client enable

sntp anycast client enable
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The sntp anycast client enable Global Configuration mode command enables
SNTP Anycast client. Use the no form of this command to disable the SNTP
Anycast client.
Syntax
sntp anycast client enable
no sntp anycast client enable
Default Configuration
The SNTP Anycast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Polling time is determined by the sntp client poll timer Global Configuration mode
command.
Use the sntp client enable (Interface) Interface Configuration mode command to
enable the SNTP client on a specific interface.
Example
The following example enables SNTP Anycast clients.
console(config)# sntp anycast client enable
6
111