Ip Host - Cisco SPS2024 Reference Manual

IP Address Commands

ip host

ip host
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip host Global Configuration mode command defines static host name-to-
address mapping in the host cache. Use the no form of this command to remove
the name-to-address mapping.
Syntax
name address
ip host
name
no ip host
Parameters
•
name
— Specifies the name of the host. (Range: 1-158 characters)
•
address
— Specifies the associated IP address.
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines a static host name-to-address mapping in the host
cache.
Console(config)# ip host accounting.LinkSys.com 176.10.23.1
15
221