Dot1X Re-Authenticate - Cisco SPS2024 Reference Manual

802.1x Commands

dot1x re-authenticate

dot1x re-authenticate
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the number of seconds between re-authentication
attempts, to 300.
Console(config)# interface ethernet e16
Console(config-if)# dot1x timeout re-authperiod 300
The dot1x re-authenticate Privileged EXEC mode command manually initiates a re-
authentication of all 802. 1 x-enabled ports or the specified 802. 1 x-enabled port.
Syntax
dot1x re-authenticate [ethernet
Parameters
•
interface —
Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
interface
]
36
521