Qos Map Dscp-Queue - Cisco SPS2024 Reference Manual

QoS Commands

qos map dscp-queue

qos map dscp-queue
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The qos map dscp-queue Global Configuration mode command modifies the
DSCP to CoS map. Use the no form of this command to restore the default map.
Syntax
qos map dscp-queue
no qos map dscp-queue
Parameters
•
dscp-list —
Specifies up to 8 DSCP values separated by a space. (Range: 0
- 63)
•
queue-id
— Specifies the queue number to which the DSCP values are
mapped.
Default Configuration
The following table describes the default map.
DSCP 0-7
Value
Queue-ID 1
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
dscp-list to queue-id
8-15 16-23 24-31
2 3 4
32-39 40-47 48-56
5 6 7
23
57-63
8
296