Ip Https Exec-Timeout - Cisco SPS2024 Reference Manual

Web Server Commands

ip https exec-timeout

ip https exec-timeout
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip https exec-timeout Global Configuration mode command sets the interval
that the system waits for user input in https sessions, prior to automatic logoff. Use
the no form of this command to return to default.
Syntax
ip https exec-timeout
no ip https exec-timeout
Parameters
•
minutes
— Integer that specifies the number of minutes. Range: 1 - 65535.
•
seconds
— Additional time intervals in seconds. Range: 0 - 59.
Default Configuration
The exec-timeout set by the ip http exec-timeout command.
Command Mode
Global Configuration mode.
User Guidelines
To specify no timeout, enter the ip https exec-timeout 0 0 command.
Example
The following example set the interval that the system waits to user input in https
sessions before automatic logoff.
Console(config)# ip https exec-timeout
minutes seconds
[ ]
35
511