Port Storm-Control Unknown-Unicast Fastethernet Rate - Cisco SPS2024 Reference Manual

Ethernet Configuration Commands

port storm-control unknown-unicast fastethernet rate

port storm-control unknown-unicast fastethernet rate
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example enables unknown unicast storm control for FE ports.
Console(config)# port storm-control unknown-unicast
fastethernet enable
The port storm-control unknown-unicast fastethernet rate Global Configuration
mode command configures the maximum rate of unknown unicast storm control
for FE ports. Use the no form of this command to return to default.
Syntax
port storm-control unknown-unicast fastethernet rate
no port storm-control unknown-unicast fastethernet rate
Parameters
•
rate —
Maximum of kilobits per second of broadcast traffic on a port.
(Range 3.5M - 100M)
Default Configuration
The rate is 3.5M.
Command Mode
Global Configuration mode
User Guidelines
Use the port storm-control unknown-unicast fastethernet enable Global
Configuration mode command to enable unknown-unicast storm control for FE
ports.
12
rate
179