Show Cpu Utilization - Cisco SPS2024 Reference Manual

System Management Commands

show cpu utilization

show cpu utilization
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
This example enables measuring CPU utilization.
Console(config)# service cpu-utilization
The show cpu utilization Privileged EXEC mode command displays information
about CPU utilization.
Syntax
show cpu utilization
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the service cpu-utilization Global Configuration command to enable
measuring CPU utilization.
Example
This example shows how to display CPU utilization information.
Console# show cpu-utilization
CPU utilization service is on.
CPU utilization
--------------------------
five seconds: 5%; one minute: 3%; five minutes: 3%
31
449