Ip Name-Server - Cisco SPS2024 Reference Manual

IP Address Commands

ip name-server

ip name-server
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip name-server Global Configuration mode command defines the available
name servers. Use the no form of this command to remove a name server.
Syntax
ip name-server server-address
server-address1
no ip name-server [
Parameters
•
server-address
Default Configuration
No name server addresses are specified.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they were
entered.
Up to 8 servers can be defined using one command or using multiple commands.
Example
The following example sets the available name server.
Console(config)# ip name-server 176.16.1.18
[ server-address2
server-address8
...
— Specifies IP addresses of the name server.
... server-address8 ]
]
15
220