Ip Dhcp Snooping Database Update-Freq - Cisco SPS2024 Reference Manual

DHCP Commands

ip dhcp snooping database update-freq

ip dhcp snooping database update-freq
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip dhcp snooping database update-freq Global Configuration Command
configures the update frequency of the DHCP snooping binding file. Use the no
form of this command to return to the default configuration.
Syntax
ip dhcp snooping database update-freq
no ip dhcp snooping database update-freq
Parameters
•
seconds —
Specifies, in seconds, the update frequency. (Range: 600 –
86400)
Default Configuration
The default value is 1200.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the update frequency of the DHCP snooping
binding file.
Console(config)# ip dhcp snooping database update-freq 600
seconds
8
135