PHY Diagnostics Commands
show copper-ports cable-length
show copper-ports cable-length
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example displays information on the last TDR test performed on all
copper ports.
Console# show copper-ports tdr
Port
Result
----
------
e1
OK
e2
Short
e3
Test has not been performed
e4
Open
e5
Fiber
The show copper-ports cable-length Privileged EXEC mode command displays
the estimated copper cable length attached to a port.
Syntax
show copper-ports cable-length [
Parameters
•
interface
— A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Length (meters)
---------------
50
64
-
interface
]
Date
----
13:32:00 23 July 2005
13:32:00 23 July 2005
-
20
256