Rmon Event - Cisco SPS2024 Reference Manual

RMON Commands

rmon event

rmon event
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The rmon event Global Configuration mode command configures an event. Use
the no form of this command to remove an event.
Syntax
rmon event index type
index
no rmon event
Parameters
•
index
— Specifies the event index. (Range: 1-65535)
•
type
— Specifies the type of notification generated by the device about
this event. Possible values: none, log, trap, log-trap.
•
text —
community
sent to the SNMP community specified by this octet string. (Range: 0-127
characters)
•
description text
127 characters)
•
name
— Specifies the name of the person who configured this event. If
unspecified, the name is an empty string.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
If log is specified as the notification type, an entry is made in the log table for each
event. If trap is specified, an SNMP trap is sent to one or more management
stations.
[community text ] [description
If the specified notification type is trap, an SNMP trap is
— Specifies a comment describing this event. (Range: 0-
25
text ] [owner name ]
329