Sntp Port - Cisco SPS2024 Reference Manual

Clock Commands

sntp port

sntp port
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
User Guidelines
The command is relevant for both Unicast and Broadcast.
Example
The following example defines the authentication key for SNTP and grants
authentication.
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
To specify the Simple Network Time Protocol (SNTP) UDP port of the SNTP
server, use the sntp port global configuration command. To use the default port,
use the no form of this command.
Syntax
sntp port port-number
no sntp port
Parameters
•
port-number — Port number for use by SNTP. Range: 1 - 65535
Default Configuration
123
Command Mode
Global configuration
6
107