Show Dot1X - Cisco SPS2024 Reference Manual

802.1x Commands

show dot1x

show dot1x
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The show dot1x Privileged EXEC mode command displays the 802. 1 x status of the
device or specified interface.
Syntax
show dot1x [ethernet
Parameters
•
interface —
Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the status of 802. 1 x-enabled Ethernet ports.
Console# show dot1x
802.1x is enabled
Port Admin Mode
---- ----------
e1 Auto
e2 Auto
interface ]
Oper Mode
---------
Authorized
Authorized
Reauth Reauth Username
Control Period
------- ------ --------
Ena 3600 Bob
Ena 3600 John
36
528