Chapter 19: Management Acl Commands; Management Access-List - Cisco SPS2024 Reference Manual

Management ACL Commands

management access-list

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The management access-list Global Configuration mode command configures a
management Access List and enters the Management Access-List Configuration
command mode. Use the no form of this command to delete an Access List.
Syntax
management access-list
no management access-list
Parameters
•
name—
Specifies the Access List name. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Use this command to configure a management Access List. This command
converts the device to Access-List Configuration mode, where the denied or
permitted access conditions with the deny and permit commands must be
defined.
name
name
19
247