Appendix A: Alias Names; Alias Name Support - Cisco SPS2024 Reference Manual

Alias Names

Alias Name Support

NOTE
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The table below defines alias names and their corresponding "native" command
names, as supported on the switch. Input parameter variations and/or returned
responses for commands launched with alias names are defined in the native
command's description in this guide.
Alias names are supported by the SPS208G, SPS224G4, and SPS2024 switches.
Native Command
copy running-
config startup-
config
configure
show bridge
address-table
show interfaces
configuration
interface
show ip dhcp
information option
show ip source-
guard
configuration
Alias Command
write (wr)
configure terminal
show mac address-table
show interfaces
show ip dhcp snooping information option
show ip verify source
A
547