Clock Timezone - Cisco SPS2024 Reference Manual

Clock Commands

clock timezone

clock timezone
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example configures an external time source for the system clock.
Console(config)# clock source sntp
The clock timezone Global Configuration mode command sets the time zone for
display purposes. Use the no form of this command to set the time to the
Coordinated Universal Time (UTC).
Syntax
hours-offset
clock timezone
no clock timezone
Parameters
•
hours-offset —
•
minutes-offset
•
acronym
— The acronym of the time zone. (Range: Up to 4 characters)
Default Configuration
Offset is 0.
Acronym is empty.
Command Mode
Global Configuration mode
minutes-offset
[minutes
Hours difference from UTC. (Range: -12 hours to +13 hours)
— Minutes difference from UTC. (Range: 0-59)
acronym
] [zone ]
6
102