Show Sntp Status - Cisco SPS2024 Reference Manual

Clock Commands

show sntp status

show sntp status
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Broadcast Clients: Enabled
Anycast Clients: Enabled
Broadcast Interfaces: e1, e3
The show sntp status Privileged EXEC mode command shows the status of the
Simple Network Time Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8,
unicast
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5
1993)
6
120