Enable Authentication - Cisco SPS2024 Reference Manual

AAA Commands

enable authentication

enable authentication
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
default — Uses the default list created with the aaa authentication login
command.
•
list-name —
Uses the indicated list created with the aaa authentication login
command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
To change (or rename) an authentication method, use the negate command and
create a new rule with the new method name.
Example
The following example specifies the default authentication method for a console.
Console(config)# line console
Console(config-line)# login authentication default
The enable authentication Line Configuration mode command specifies the
authentication method list when accessing a higher privilege level from a remote
Telnet or console. To restore the default configuration specified by the aaa
authentication enable command, use the no form of this command.
2
37