Cisco SPS2024 Reference Manual page 83

Address Table Commands
bridge multicast forward-all
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
add — Force forwarding all Multicast packets.
•
remove — Do not force forwarding all Multicast packets.
•
interface-list
— Separate nonconsecutive Ethernet ports with a comma and
no spaces; a hyphen is used to designate a range of ports.
•
port-channel-number-list
comma and no spaces; a hyphen is used to designate a range of port-
channels.
Default Configuration
This setting is disabled
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all Multicast packets on port e8 are forwarded.
Console(config)# interface vlan 2
Console(config-if)# bridge multicast forward-all add ethernet e8
— Separate nonconsecutive port-channels with a
5
81