Ip Arp Inspection List Create - Cisco SPS2024 Reference Manual

ARP Inspection Commands

ip arp inspection list create

ip arp inspection list create
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example perform specific checks for dynamic Address Resolution
Protocol (ARP) inspection.
Console(config)# ip arp inspection validate
The ip arp inspection list create Global Configuration mode command creates a
static ARP binding list and to enter the ARP list configuration mode. To delete the
list, use the no form of this command.
Syntax
ip arp inspection list create
no ip arp inspection list create
Parameters
•
name
— Specifies the list name. (Range: 1-32 characters)
Default Configuration
No static ARP binding list exists.
Command Mode
Global Configuration mode
User Guidelines
This command enables static ARP inspection on a VLAN.
name
name
4
68