Mapping DSCP to Queue
The DSCP to Queue Page enables mapping DSCP values to specific queues.
The DSCP to Queue Page contains the following fields:
•
DSCP In — Indicates the Differentiated Services Code Point (DSCP) value in the incoming
packet. The following values are reserved and cannot be changed: 3, 11, 19, 27, 35, 43,
51, and 59.
•
Queue — Defines the traffic forwarding queue to which the DSCP priority is mapped.
Chapter 13: Configuring Quality of Service
Defining General Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
DSCP to Queue Page
Chapter
13
161