Multifunction Switch - BRP can-am RENEGADE 500 2015 Operator's Manual

Table of Contents

Advertisement

CONTROLS
ON with Lights
When the key is turned in this position,
the electrical system of the vehicle is
activated.
The gauge should wake-up.
The vehicle lights are turned on.
The engine can be started.
ON
This position offers the same functions
as ON with lights position, except the
vehicle lights are turned off.
Digitally Encoded Security System
(D.E.S.S.)
The ignition keys contain an electronic
circuit that gives it a unique electronic
serial number.
The D.E.S.S. system reads the key
code and allows engine starting for
keys it recognizes.
Types of Keys
This vehicle can be operated using 2
different types of ignition keys:
– Normal key (grey)
– Performance key (black).
The key type is differentiated by its
color.
WARNING
Rollovers, tipovers, collisions and
loss of control resulting in seri-
ous injury or death are possible
with the performance or normal
keys. Using the normal key is not
a substitute for the operator being
prepared, qualified, and operating
with care.
Normal Key
The vehicle is delivered with a normal
key.
The normal key limits the vehicle rate
of acceleration (800R/1000) and the
vehicle speed to 70 km/h (43 MPH).
______________
66
WARNING
On steep downhills, the engine
speed limiter may not prevent the
vehicle from accelerating beyond
this speed.
This key may be useful for riders who
prefer more gradual acceleration, or
for riding in environments where full
speed and high acceleration are not
desirable. For example, in narrow,
winding trails, operators may prefer
the normal key.
Performance Key
The vehicle is delivered with a perfor-
mance key, which allows the user to
access the full torque of the engine
(800R/1000) as well as the top speed
of the vehicle.
This may be useful for riders who pre-
fer crisper throttle response, and for
environments where higher speeds
and greater acceleration are appro-
priate. For example, in wide-open,
straight trails, operators may prefer
the performance key.

8) Multifunction Switch

The multifunction switch is located on
the LH side of the handlebar.
The controls located on this multifunc-
tion switch are:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Can-am renegade 800r 2015Can-am renegade 1000 2015

Table of Contents