Lh Handlebar Switches; Multifunction Switch - BRP can-am OUTLANDER 2021 Series Operator's Manual

CONTROLS
priate. For example, in wide-open
straight trails, operators may prefer
the performance key.
Normal Key
The normal key limits the vehicle rate
of acceleration and/or the vehicle
speed to 70 km/h (43 MPH).
WARNING
On steep downhills, the engine
speed limiter may not prevent the
vehicle from accelerating beyond
this speed.
This key may be useful for riders who
prefer more gradual acceleration, or
for riding in environments where full
speed and high acceleration are not
desirable. For example, in narrow,
winding trails, operators may prefer
a normal key.
D.E.S.S. Flexibility
The D.E.S.S. of your vehicle can be pro-
grammed by your authorized Can-Am
dealer to accept up to 8 different keys.
If you have more than one D.E.S.S.
equipped Can-Am vehicle, each can
be programmed by your authorized
Can-Am dealer to accept the other ve-
hicle D.E.S.S. keys.
______________
96

7) LH Handlebar Switches

219001854-002_a
1. Multifunction switch (see details in this
section)
2. Heated grips switch (see EQUIPMENT for
details)
3. Heated throttle lever switch (see
EQUIPMENT for details)
4. Winch switch (see EQUIPMENT for details)

8) Multifunction Switch

The multifunction switch is located on
the LH side of the handlebar.
The controls located on this multifunc-
tion switch are:
219001731-001_a
TYPICAL — MULTIFUNCTION SWITCH
1. Headlight switch
2. Engine start button
3. Engine stop switch
4. Override/DPS button (if applicable)
Low/High/OFF Headlight Switch
This switch is used to select either the
headlights low or high beams or to turn
them off.