Table of Contents
Advertisement
Recording Your Performance
You can record your keyboard performance as a User Song in SMF format. Up to two Parts (L and R) can be
recorded separately.
NOTICE
• Note that the Recording operation replaces already
recorded data with the newly recorded data, since only
one User Song is available. To save the recorded data,
transfer it to a computer as an SMF file. For details, refer to
"Computer-related Operations" on page 8.
• If the data capacity of the instrument approaches full when
you engage Record Ready mode, the [] and [
flash quickly for about three seconds. In this case, your
performance may not be recorded.
NOTE
• You can record up to 100 KB (or approximately 11,000 notes) on this instru-
ment.
Quick Recording
You can record a Rhythm with your performance.
1
Before recording, make the settings
such as Voice, Beat, Tempo and
Rhythm.
Because some of the settings cannot be changed
after the Record mode is engaged, make the set-
tings according to your performance preferences.
2
Press the [] to engage Record Ready
mode.
The [] lamp will flash according to the current
tempo.
Flashes
To exit from Record Ready mode, press [].
NOTE
• You cannot engage Record Ready mode while a Song is playing.
• You can use the Metronome while recording; however, the Metronome
sound will not be recorded.
3
Play the keyboard or press [
recording.
You can also start recording by pressing the
[RHYTHM].
Lights up
Recording
4
Press either [] or [
recording.
The [] and [
recorded data is being stored. After the operation
is completed, the [] and [
NOTICE
/] lamps
5
To hear the recorded Song, press [
to start playback.
Press [
Part Assignment
When either the Split or Duo is used for recording,
the data as listed below will be recorded to each
part.
When Split or
Duo is on:
Recording Independently to Two
Parts
You can record your performance to the L part (left
hand part) and R part (right hand part) separately.
NOTICE
• If you select a Part containing data, the Recording opera-
tion will replace the already-recorded data with the new
data.
NOTE
/] to start
• When you use Split or Duo, use the Quick Recording method. You cannot
record each part separately.
• Rhythm can only be recorded to a blank Song (both L/R parts are empty). If you
want to record a Rhythm, make sure to record first to a blank Song.
1
Before recording, make the settings
such as Voice, Beat or Rhythm.
2
While holding down [], press [R] or [L]
for the part you want to record, to
engage Record Ready Mode.
To exit from Record Ready mode, press [].
Flashes
/] to stop
/] lamps flash, indicating that the
• Never turn off the power while the recorded data is
being stored (while the lamps are flashing). Other-
wise, all recorded data will be lost.
/] again to stop playback.
L part
Keyboard perfor-
mance in the left
hand section
P-125a Owner's Manual
/] lamps turns off.
/]
R part
Keyboard perfor-
mance in the right
hand section
21
Advertisement
Table of Contents
