Setting The Virtual Com Port - Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual

Calogix Setup

Setting the Virtual COM Port

Setting the
Virtual COM Port
D-4 Omni FTIR Multi Gas CEMS Instruction Manual
5. Expand 'Ports (COM & LPT)'. Find 'USB Serial Port (COMn)',
where n is the number of the com port; here it is 6.
6. Close Control panel without making any changes.
Use the following procedure to set the virtual COM port.
1. Open CALGrafix software with the icon on the desktop.
2. Click the second icon from the left in the icon bar.
Thermo Fisher Scientific