Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual page 49

Operation
Imacc FTIR Software Suite (IFSS)
The ImaccMonitor can be manually started from the Windows "Start"
menu or by double clicking the ImaccMonitor Icon shown above on the
desktop and loading a .layout file(*.layout), or launched directly from a
selected .layout file or shortcut.
Once loaded, the "run" (►) and "stop" (■) script controls on the Monitor
toolbar can be used to manually start and stop the execution of the
Monitor.
The loaded script can be observed by selecting the 'View Script' button in
the script controls. The ImaccScriptEditor will open the script currently
saved with the layout. 'View Script' may be used while the monitor is
running to observe the operation of the script. Function blocks in the script
will be highlighted as they are carried out. Function blocks will also display
data as it is collected. As an example, the function block that collects
temperature data from the CALogix controllers in the Temperature
Control Box (TCB) will display temperature data.
The top section of the screen is divided into two panes. Concentrations,
which displays a list of current compounds and their concentrations, and
Process Status, which displays various FTIR status parameters.
The lower half of the screen consists of four tabbed displays: Spectrum Plot
that displays spectral plots of single beam intensities and absorbance, and
three Concentration Plot tabs that display plots of concentrations versus
time.
Thermo Fisher Scientific Omni FTIR Multi Gas CEMS Instruction Manual 3-3