Table of Contents
Advertisement
Operation
Imacc FTIR Software Suite (IFSS)
ConcentrationPlot/
Spectrum Plot
3-6
Omni FTIR Multi Gas CEMS Instruction Manual
The SpectrumPlot is used to display both real-time spectral data from the
ImaccServer or saved spectrum files.
The configuration popup menu appears when right clicking at any point of
the grey area of the plot. Different plots can be added or removed by the
"add" and "remove" control. When right clicking over the white area of the
plot, a menu appears to add saved spectral files to the plot. The toolbar on
the right can be used to adjust the SpectrumPlot display settings.
The ConcentrationPlot is used to display concentration values over time on
a strip chart.
Right clicking at the grey area of the plot displays a popup menu. Choose
settings from three tabs to configure the ConcentrationPlot display.
Display Tab
The display tab is used to configure what compounds are displayed and the
attributes associated with each.
Code Name – The name of the compound.
HI Limit – The high limit of the compound, used to scale the data when
"Show as percentage" is checked.
Low Limit – The low limit of the compound.
Show as percentage – Shows the data scaled to 100%.
Load Configuration – Loads a saved configuration of the data limits and
colors (*.desc file).
Save Configuration – Saves a configuration of data limits and colors.
Thermo Fisher Scientific
Advertisement
Table of Contents
