Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual page 249

IMACC Script Setting
Modbus Control Version
For all the parameters, the data type is IEEE float. The code name can be
edited to reflect the parameter meaning. The register number is determined
by the Calogix setting. Click the "serial" button on the top so its setting
block pops up, as shown.
This setting is the same for all six parameters.
Collect EZ setting for running FTIR interferometer
●
The spectrum collection setting is included in the stand-alone container,
next to the "ModbusMultiSensor" container. As shown, it is the same as
described in the CEMS_Samplemode section.
Note that all the settings should be the same as the one included in the
background spectrum collection.
Thermo Fisher Scientific Omni FTIR Multi Gas CEMS Instruction Manual E-15