Figure 5-22. Removing The Purge Gas Generator - Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual

Preventive Maintenance and Servicing
Removing the Purge Gas Generator
5-32 Omni FTIR Multi Gas CEMS Instruction Manual
Figure 5–22. Removing the Purge Gas Generator
2. Turn off the air purifier circuit breaker on the breaker box. Turn off
the power switch on the purge gas generator and disconnect the power
cable (Figure 5–22).
3. Using the 9/16-inch wrench, loosen the nut and remove the inlet
tubing to the purge gas generator
4. Using the 9/16-inch wrench, loosen the nut and remove the outlet
tubing from the purge gas generator
5. Using the large Phillips screwdriver, loosen but do not remove the 4
mounting screws (Figure
6. Lift the purge gas generator up and off of the 4 mounting screws
(Figure 5–22).
(Figure 5–22).
(Figure 5–22).
5–22).
Thermo Fisher Scientific