Operation
Data Server Software
3-18
Omni FTIR Multi Gas CEMS Instruction Manual
The three Modbus network parameters are:
Device Address: Modbus slave address of the FTIR gas analyzer
●
Poll Delay: Interval at which the Modbus COM port is scanned for
●
instructions
Response Delay: Delay in sending the response (used in case of timing
●
problems).
The AutoStart checkbox needs to be selected to cause Modbus to be
automatically started when the program is opened by Windows.
If IMACC Modbus is added to the Windows Startup folder and the
AutoStart capability is enabled, the program will automatically open and
start upon bootup.
Thermo Fisher Scientific