Table of Contents
Advertisement
Thermo Fisher Scientific
About This Manual
This manual provides information about installing, maintaining, and
servicing the Omni FTIR Multi Gas CEMS. It also contains important
alerts to ensure safe operation and prevent equipment damage. The manual
is organized into the following chapters and appendixes to provide direct
access to specific operation and service information.
Chapter 1 "Introduction" provides an overview of the product,
●
describes the system components, and product specifications.
Chapter 2
"System Installation, Start Up and Shut
●
the setup and different instrument configurations, and provides a quick
start procedure.
Chapter 3 "Operation" describes the functions of the instrument
●
keypad, and the enhanced probe display.
Chapter 4 "Calibration" provides the calibration process and
●
procedures for calibrating the instrument.
Chapter 5
"Preventive Maintenance and
●
maintenance procedures to ensure reliable and consistent instrument
operation and step-by-step instructions for repairing and replacing
components, and a replacement parts list. It also includes contact
information for product support and technical information.
Chapter 6 "Troubleshooting" provides guidelines for diagnosing
●
analyzer problems, isolating faults, and includes recommended actions
for restoring proper operation.
Chapter 7
"System Component
●
theory of operation, and describes the function of the system
components.
Appendix A "Warranty" is a copy of the warranty statement.
●
Appendix B
"Modbus
●
Protocol Interface and is supported both over RS-232/485 (RTU
protocol) as well as TCP/IP over Ethernet.
Appendix C
"Interfacing a DCS/PLC with the Omni FTIR Multi Gas
●
CEMS" provides details on interfacing DCS/PLC with the Omni
FTIR Multi Gas CEMS.
Servicing" provides
Description" provides an overview,
Protocol" provides a description of the Modbus
Omni FTIR Multi Gas CEMS Instruction Manual
Down" describes
i
Advertisement
Table of Contents
