Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual page 6

About This Manual
Safety
Safety and Equipment
Damage Alerts
ii Omni FTIR Multi Gas CEMS Instruction Manual
Appendix D
●
software.
Appendix E
●
two versions of IMACC scripts.
Appendix F
●
describes transferring data.
Safety
Review the following information carefully before using the system. This
manual provides specific information on how to operate the system,
however if the system is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
This manual contains important information to alert you to potential safety
hazards and risks of equipment damage. Refer to the following types of
alerts you may see in this manual.
Safety and Equipment Damage Alert Descriptions
Alert
Safety and Equipment Damage Alerts in this Manual
Alert
"Calogix Setup" provides a description of the Calogix
"IMACC Script
"Concentration Data Transfer Using a Web
Description
DANGER A hazard is present that will result in death or serious
personal injury if the warning is ignored.
WARNING A hazard is present or an unsafe practice can result in
serious personal injury if the warning is ignored.
CAUTION The hazard or unsafe practice could result in minor to
moderate personal injury if the warning is ignored.
Equipment Damage The hazard or unsafe practice could result in property
damage if the warning is ignored.
Description
WARNING If the equipment is operated in a manner not specified by
the manufacturer, the protection provided by the
equipment may be impaired.
Avoid shock hazard. Always turn off the circuit breaker on
the breaker panel on the front of the rack for any
component to be cleaned. Do not allow cleaning
solutions or liquids to run into the analyzer, its power
supply, or any powered components.
Setting" describes the script setting for
▲
Server"
▲
▲
▲
▲
▲
Thermo Fisher Scientific