Inputting Controller Values - Thermo Scientific Omni FTIR Multi Gas CEMS Instruction Manual

Inputting Controller
Thermo Fisher Scientific
Use the following procedure to input controller values.
Values
1. Right-click anywhere on the CALogix window. Select 'Properties from
the pop-up menu and then select each module in turn to enter values
for it.
2. Once a module is selected, enter the correct values according to
D–1. Values are grouped according to subheadings.
Programming the Controllers and Setting Parameters
Omni FTIR Multi Gas CEMS Instruction Manual
Calogix Setup
Table
D-9